The Shure SLX24/BETA58 Handheld Wireless System, Includes SLX2/Beta58 Handheld Transmitter and SLX4 Diversity Receiver.
The Shure SLX24/BETA58 Handheld Wireless System reproduces vocals beautifully and sets up easily. SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. Sound installations need powerful wireless tools that can be set up quickly and used confidently. Shure's rugged SLX Wireless Systems exceed these demands bringing unparalleled ease of set-up and exceptional audio quality into reach. With included accessories and optional logic functionality, SLX is also installation-ready, out-of-the-box. The Shure SLX24/BETA58 Handheld Wireless System includes the SLX4 receiver and SLX2 handheld transmitter with a Beta 58 microphone head. The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box. The SLX2/Beta58 Wireless Handheld Transmitter includes timed backlit LCD display, frequency and power lockout, and "Mute" functionality. The transmitter design allows for interchangeable microphone cartridges. This version includes the Beta 58 cartridge. A high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording, it maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone colouration. The Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals, the Shure SLX24/BETA58 combines that pedigree microphone with professional electronics for reliable performance after performance.
The main features of the Shure SLX24/BETA58 include:
System:
Superb high performance, high reliability wireless microphone system for vocal performers and presenters
Includes the SLX4 receiver and SLX2 handheld transmitter with a Beta 58 dynamic microphone head
Unparalleled Ease of Set-Up
Auto Frequency Selection locates a clear channel instantly
Auto Transmitter Set-up automatically syncs the transmitter to the receiver via infrared
With included accessories SLX is installation ready, out-of-the-box
Exceptional Audio Quality - employs a level-dependant circuitry which dramatically improves audio quality by eliminating artifacts associated with traditional, fixed companding
Microprocessor controlled Predictive Diversity
Operating Range Under Typical Conditions: 100m (300 ft.) Note: actual range depends on RF signal absorption, reflection, and interference
Audio Frequency Response (+/- 2 dB): Minimum: 45 Hz, Maximum: 15 kHz
Total Harmonic Distortion (ref. +/- 38 kHz deviation, 1 kHz tone): 0.5%, typical
Dynamic Range: >100 dB A-weighted
SLX2 Handheld Transmitter:
SLX2/Beta58: Dynamic, Supercardioid
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
Audio Input Level: +2 dBV maximum at -10dB position, -8 dBV maximum at 0dB position
Gain Adjustment Range: 10dB
RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
Dimensions (including cartridge): 254 mm x 51 mm dia. (10 x 2 in.)
Weight: 290 grams (10.2 oz.) without batteries
Housing: Molded PC/ABS handle and battery cup
Power Requirements: 2 AA size alkaline or rechargeable batteries
Battery Life: >8 hours (alkaline)
SLX4 Receiver:
Automatic Frequency Selection
Automatic Transmitter Setup
960 Selectable frequencies across 24 MHz bandwidth
Selectable frequencies in 25 kHz steps
Detachable 1/4 wave antennas
Microprocessor-controlled predictive diversity
RF presence LED
5-segment audio meter
Multi-function, backlit LCD
Low battery indicator
Frequency and power lockout
Rugged metal chassis
Volume control on rear of unit
1/2 rack design
Furnished rack hardware
Non-slip bumpers for use out of rack
XLR and 1/4 inch jack outputs
Dimensions: 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight: 816 g (1 lb. 13 oz.)
Housing: Galvanized steel
Audio Output Level (ref. +/- 38 kHz deviation with 1 kHz tone) - XLR connector (into 600 O load): 13 dBV, 1/4 inch connector (into 3000 Ohm load): 2 dBV
Output Impedance - XLR connector: 200 Ohms, 1/4 inch connector: 1kOhm
XLR output - Impedance balanced, Pin 1: Ground, Pin 2: Audio, Pin 3: No signal
Sensitivity: 105 dBm for 12 dB SINAD, typical
Image Rejection: >70 dB, typical
Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
|
