Product
When CME launched the UF Series in 2005, they re-wrote the rule book when
it came to low cost MIDI controller keyboards offering unprecedented build-quality
and features for the price. Now CME are proud to present their next-level series
of MIDI controller keyboards, offering yet more outstanding features including
a world-first for MIDI controller keyboards - motorised faders!
The CME VX Series consists of four models: VX5, VX6, VX7 and VX8 - each of
which provides the same outstanding control facilities but with differing keyboard
lengths (and a different keyboard action in the case of the VX8). Read on below
to find out why the CME VX Series are perhaps the best MIDI controller keyboards
on the market, despite their keen price...
Features
Semi Weighted or Hammer Action?
The CME VX5, VX6, and VX7 feature semi-weighted synth-action keyboards. Each
key features a weight inside to provide a solid, balanced feel and this results
in a natural performance - it is far easier to control your playing dynamics
with a semi-weighted keyboard compared with a non-weighted keybord and it is
far easier to play fast passages too. Once you have used a semi-weighted keyboard
for a short time, you will not want to go back to an all-plastic design.
The VX8 takes things further still with CME's top-notch graded hammer-action
weighted keyboard. This emulates both the feel and response of a real grand
piano action making the VX8 the ideal choice for pianists and those who want
the ultimate playing experience.
To tailor the VX Series to your playing style and connected sound source,
all models feature a choice of seven velocity curves plus three fixed-velocity
options for when velocity sensitivity is not required. All models also feature
keyboard aftertouch with a choice of 10 aftertouch curves.
4 Keyboard Zones
The VX Series keyboard can be divided into as many as four zones, and each
zones's data will be sent to a different MIDI Out, so you can control and play
four MIDI devices at the same time. Independant velocity ranges, octave and
transpose settings and port / MIDI channel settings can be specified for each
zone, and zones can be switched on or off.
Realtime Control
The CME VX Series provides an extensive array of assignable controllers for
realtime tweaking, programming and performance:
Motorised Faders
A CME first - motorised faders on a MIDI controller keyboard! More commonly
found on expensive digital mixing consoles and control surfaces, motorised
faders are a welcome new addition to the controller keyboard world. Nine motorised
faders are provided which are ideal for controlling software mixers, programming
synths or for controlling drawbars on an organ emulation such as NI B4 Organ
II.
A MIDI controller number, value range, MIDI channel and port assignment can
be made for each fader. Since the faders are motorised, they can respond and
move in accordance to incoming MIDI data, so the actual position of the faders
will always match the on-screen position of a software mixer for example, and
this makes working with digital audio workstations so much easier, especially
when playing back automation data.
The VX Series also feature their own built-in automation sequencer. Fader
movements can be recorded and played back opening up lots of possibilites for
live performance. Complex automations that would be difficult to perform in
real-time can also be gradually built up and performed with ease.
17 Knobs:
A total of 17 knobs - 8 potentiometers and 9 endless encoders - are provided.
These are excellent for tweaking and programming synth sounds in real-time
or for controlling pan pots on a software mixer for example. As per the motorised
faders, a MIDI controller number, value range, MIDI channel and port assignment
can be made for each knob.
Trigger Pads
12 Trigger Pads can be found just above the keyboard and these are ideal
for programming drum and percussion parts into a MIDI sequencer or for triggering
samples and sound effects. The pads are velocity-sensitive with an adjustable
velocity curve and may be assigned to any MIDI note or MIDI controller with
a velocity range and destination MIDI channel and port assignment. The pads
can also be used to trigger Standard MIDI Files that can be imported via USB
from the CME VX Brain software running on a computer.
Ribbon Controller
A Ribbon Controller is conveniently located to the left of the keyboard and
sends controller data when pressure is applied. The transmitted value depends
on the position along the ribbon controller that you press, so by sliding your
finger along the ribbon a variety of effects can be created.
The ribbon controller is excellent for special effects or for emulating the
slides of acoustic instruments such as brass or stringed instruments and is
great at injecting life into an an otherwise sterile performance. A MIDI controller
number, value range, MIDI channel and port assignment can all be made for the
ribbon controller.
Keyboard Aftertouch
What do you do when both hands are tied up playing the keyboard but you still
want to inject expression into a performance? Aftertouch is the answer! By
pushing down harder once a key has been played, control data can be transmitted.
It is most commonly used to introduce vibrato, raise the filter-cutoff point
or introduce pitch-bend, but many other possibilities exist depending on your
sound source. A choice of 10 aftertouch curves is available.
Breath Controller Input
Just as with aftertouch, a breath controller (not included) plugged into
the VX Series provides an ideal way of introducing real-time modulation of
sounds without losing a hand. Adding vibrato to a flute sound would be one
example of it's use - the harder you blow, the greater the intensity. The breath
controller input will work with breath controllers such as the Yamaha BC-1
and BC-3. A MIDI controller number, value range, MIDI channel and port assignment
can all be made.
Transport Controls
The chunky transport controls provide instant control over your sequencer
without the need to reach for the mouse. Six controls are provided.
Sustain Pedal and Expression Pedal Connections
Two foot pedal inputs are provided - both a switch-type pedal and an expression
pedal may be connected (not included). A switch-type pedal would commonly be
used as a sustain pedal (eg: to emulate the damper pedal on a piano) and an
expression pedal could be used to control volume, or the filter cutoff level
of a synthesizer or even a wah-wah effect for example. A MIDI controller number,
value range, MIDI channel and port assignment can be made for each pedal.
Pitch Bend and Modulation Wheels
Standard pitch bend and modulation wheels can be found to the left of the
keyboard and these, like the other controllers on the VX Series are assignable
with an adjustable value range and destination MIDI channel and port assignment.
Function Shortcut Buttons
8 assignable shortcut buttons are provided and may be assigned either a MIDI
controller number, MIDI note or MIDI program change. They could for example
be used to switch functions on or off (such as portamento on a synthesizer)
or for transmitting specific program change messages to change sounds during
live performance.
Built-in USB Audio and MIDI Interface
A high-quality built-in USB audio and MIDI interface means additional interfaces
are not required when the VX5, VX6, VX7 and VX8 are connected to a computer.
Two Mic/Line Inputs (with input gain adjustment), two line outputs, two headphone
outputs (with volume control), 1 MIDI input and 4 MIDI outputs are provided.
A USB hub is also built into the VX Series which means you will have more
free USB ports after connecting a CME VX Series keyboard to your computer -
not less! CME's U-CTRL function can also be found on the VX Series which makes
setting up control of popular music software easy. The VX Series are class-compliant
with Windows XP, Vista and Mac OS X, so you do not need to install a driver.
Muiti-Ethnic
Scales and Selectable Temperament
The CME VX Series allows you to play music in a wide selection of multi-ethnic
scales from around the world. There is a choice of 41 scales detailed within
the user manual. The VX Series keyboards are also not just limited to equal
temperament as you may select from 13 different musical temperaments to play
in.
CME Quality
The CME VX5, VX6, VX7 and VX8 feature CME's renowned build-quality and this
extends to the keyboard and controls - not just the chassis! This makes them
idealy suited for both live use and professional studios.
CME - Always One Step
Ahead!
The CME VX Series provide great keyboard actions, great build-quality, an
astounding array of realtime controls and a unique combination of well-thought-out
features. The good news continues however as you will find that the CME VX5,
VX6, VX7 and VX8 are available at a highly competitive price!
Click to Zoom
