Audio Technica ATW-701H Active - Wireless Headset Mic System

Product

Audio-Technica's 700 Series wireless delivers professional features and sound quality unheard of in its class. These easy-to-use wireless systems feature eight selectable frequency-coordinated channels, diversity operation for increased range/reliability, automatic frequency scanning, tone lock, squelch and more. 700 Series systems come equipped with your choice of handheld, headworn, or lavalier microphones; or choose a system designed for guitar hookup. For multiple-mic applications, as many as eight systems may be used together.

Features

8 selectable frequency-coordinated UHF channels
Use up to 8 simultaneous systems all channels compatible
Automatic frequency scanning
Diversity operation for increased range/reliability
LED Channel display plus Antenna, AF Peak indicators
Balanced XLR and unbalanced output connectors
tone lock squelch system eliminates interference when transmitter is off
UniPak transmitter features: separate guitar/mic trim control, switchable high/low RF power, internal channel selector, multi-color battery/power indicator, AA operation
Handheld transmitter features: variable trim control, internal channel selector, multi-color battery/power indicator, AA operation

700 body-pack systems are compatible with all Audio-Technica Wireless Essentials® microphones and cables

Specifications

Operating Frequencies UHF E-Band: 800-820 MHz to UHF F-Band: 840-865 MHz
Number of Channels: 8
Frequency Stability: ±0.005%, Phase Lock Loop frequency control
Modulation Mode: FM
Maximum Deviation: ±25 kHz
Operating Range: 200' typical
Operating Temperature Range: 40° F (4° C) to 110° F (43° C)
Frequency Response: 100 Hz to 12 kHz

RECEIVER SPECIFICATIONS

Receiving System: Antenna-switching diversity
Image Rejection: 55 dB minimum
Signal-to-noise Ratio: >80 dB at 10 kHz deviation (IEC-weighted), maximum deviation 25 kHz
Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz)
Sensitivity: 25 dBµV (S/N 60 dB at 10 kHz deviation, IEC-weighted)
Audio Output Unbalanced: 211 mV (-13.5 dBV) (1 kHz modulation, 10 kHz deviation) Balanced: 150 mV (-16.5 dBV) (1 kHz modulation, 10 kHz deviation)
Output Connectors Unbalanced: 1/4" TS ("mono") phone jack Balanced: XLRM-type
Power Supply: 230V AC (50 Hz) to 12V DC 500m A (centre positive), external power supply
Dimensions: 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D
Net Weight: 365g
Accessory Included: Power supply

BODY-PACK TRANSMITTER SPECIFICATIONS

RF Power Output High: 10 mW; Low: 5 mW
Spurious Emissions: According to R&TTE Directive
Dynamic Range: >100 dB, A-weighted
Input Connections: High impedance, low impedance, bias
Batteries: Two 1.5V AA alkaline (not included)
Current Consumption: High: 140 mA; Low: 130 mA, typical
Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
Dimensions: 2.56" (65.0 mm) W x 4.13" (105.0 mm) H x 0.73" (18.5 mm) D
Net Weight: 2.8 oz (80 g) without batteries

HANDHELD TRANSMITTER SPECIFICATIONS

RF Power Output: 10 mW
Spurious Emissions: According to R&TTE Directive
Dynamic Range: >100 dB, A-weighted
Microphone Element: Dynamic, unidirectional
Batteries: Two 1.5V AA alkaline (not included)
Current Consumption: 120 mA, typical
Battery Life: Approximately 12 hours, depending on battery type and use pattern
Dimensions: 9.65" (245.0 mm) long, 2.11" (53.5 mm) diameter
Net Weight: 9.1 oz (257 g) (without batteries)
Accessory Included: AT8456a Quiet-Flex stand clamp

Â

Features

Specifications